XTA DC1048 - Manual (Page 31)

Operator’s Manual DC1048 Integrated Audio Management Page 31
Timed Presets and Preset Files
In addition to storing presets within the unit itself, ICORE opens up the
possibility of storing and recalling individual presets from a virtually unlimited
library stored on the PC running the software.
2 1
Storage of presets within the unit is accomplished by selecting the required
location from the drop-down list and then choosing Store. Recall is instantaneous
with all settings changing on the unit and updating on the software control
panels. Storing settings will pop up a window allowing the name to be changed
before storing, and renaming allows just the name of a preset to be changed
without saving new settings.
The icon buttons 1 and 2 are used to save and load individual presets from files
stored on the computer, NOT in the unit.
Press button 1 to load a preset. This method effectively bypasses the unit’s
preset storage memory – loading a preset from a PC file will transmit the settings
direct to the unit’s working memory. It will be remembered when the PC is
disconnected or off-line and will be reloaded if the unit is power cycled, but it is
not stored in a user memory within the device itself. To store it in a user
memory, just press the “Store” button after it’s been loaded and choose a
location as normal.
Saving settings into a PC file is accomplished using button 2 – this allows a library
of presets to be set up on the PC and easily copied (or emailed) to other devices.
Remember this doesn’t store the settings in the unit directly – it stores the
current settings shown in the software as a preset file on the PC.
These preset files are independent of the iCore configuration file accessed through
the File > Save option (an “.icd” file). The “.icd” files store all details of all