XTA DC1048 - Manual (Page 37)

Operator’s Manual DC1048 Integrated Audio Management Page 37
Security and Locking
Overview
The DC1048 and ICORE both have security systems that allow for local and
remote security to be implemented entirely independently. Via the front panel of
the unit itself, control may be restricted or entirely prevented. Through
ICORE,
access to internal unit settings may be restricted though user levels with
individual rights given to up to ten users, each with their own username and
password.
Local Front Panel Locking
Pressing the SYSTEM button will show the lock options, namely
Sys. Lock: Sys. Lock: Sys. Lock: Sys. Lock: Full Full Full Full All front panel functions disabled
Menu Menu Menu Menu Only preset recall allowed
Off Off Off Off All access allowed
Use the and buttons to choose the required level of lock and press OK
The display will show:
System Menu:… System Menu:… System Menu:… System Menu:…
Enter Pin: 0000 Enter Pin: 0000 Enter Pin: 0000 Enter Pin: 0000
with a cursor flashing over the left-most ‘0’. Use the and buttons to set the
digit and press OK to move onto the next digit. After setting the last digit,
pressing
OK
will display
[OK] [OK] [OK] [OK] –––– Lock Unit Lock Unit Lock Unit Lock Unit
with PIN: 0000 with PIN: 0000 with PIN: 0000 with PIN: 0000
to lock the unit now, press OK , otherwise wait 5 seconds for the menu to drop
out, or press another menu button to escape.
Once locked (depending on if it’s a full or menu lock), pressing any menu key will
display
Menus Locked! Menus Locked! Menus Locked! Menus Locked!
Enter Pin: 0000 Enter Pin: 0000 Enter Pin: 0000 Enter Pin: 0000
Simply enter the PIN again as for locking and press OK to unlock the unit.
Forgotten the PIN?
Well that’s not very clever, is it? ;) You need to email us for the unlocking
procedure –
[email protected] .