Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 103)

System Management
ATCA-7350 Installation and Use (6806800G59G) 103
The following table gives the temperature limits for single components as shown in the Figure
5-2 .
5.3 Flash ROM Recovery Mechanism
The IPMC provides a Flash ROM recovery mechanism that supports booting IPMC FW from a
fail-safe location in case the content of the firmware flash inside the IPMC (Image A) is
corrupted.
The IPMC controller chip has a Boot Loader that resides on the on-chip flash. The Boot Loader
can determine the validity of FW Image A. The Boot Loader is programmed in manufacture and
will not be changed by design. The ATCA-7350 provides an external Flash chip for the IPMC,
which stores the FW Image B and FW Image C.
Location Component Temperature Limit
1 Intel Xeon Processor LV 5 to +85.9 ºC
2 Intel Xeon Processor LV 5 to +85.9 ºC
3 Intel 631xESB/632xESB
I/O
Controller Hub 5 to +105 ºC
4 Intel 5000 Series Chipset
Memory
Controller Hub(MCH) 5 to +105 ºC
5 Memory modules SDRAM 0 to +95 ºC AMB 0 to +110 ºC
6 power converter 48V-
12V -40 to +105 ºC
7 DC/DC converter 12V-
3.3V -40 to +85 ºC
8 Voltage Regulator of cpu 0 to +125 ºC
9 Voltage Regulator of cpu 0 to +125 ºC