Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 180)

Troubleshooting
ATCA-7350 Installation and Use (6806800G59G) 180
5. Replace the mouse.
For details, refer to the document shipped with the mouse that you use.
A.10.3 Monitor Remains Dark
Description
When you connect the monitor to the running ATCA-7350 or start some applications of the
ATCA-7350, the monitor remains dark.
Solution
To solve the problem, proceed as follows:
1. Make sure that the power cable of the monitor is connected properly.
2. Make sure that the monitor is connected to the RTM-ATCA-7x50 properly and firmly.
3. Make sure that you have turned on the monitor and properly adjusted the luminance and
contrast control.
4. Power off the ATCA-7350 and then power it on again.
5. Replace the monitor or ATCA-7350. For details on how to replace the monitor, refer to the
document shipped with the monitor that you use.
For details on how to replace the ATCA-7350, see
Installing and Removing the Blade on page
51 .
A.10.4 Monitor Display Is Abnormal
Description
Jittering, unreadable, rolling or twisted image is displayed on the monitor screen.