Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 163)

Software Upgrade
ATCA-7350 Installation and Use (6806800G59G) 163
SDR and FRU Upgrade
Follow the steps below.
1. Boot Linux on the ATCA-7350 blade or on a host blade with network access to a
'rmcp' capable shelf manager hosting the target ATCA-7350 to get a Linux shell
prompt.
2. Upgrade the firmware using the update script:
$ ./fw_upd.sh [-U <user>] [-P <password>] [-n <slot number>]
[-s] [-t <rmcp-server>] -i <image_tag>
Example:
update method via ’rmcp’ server
$ ./fw_upd.sh -i fru_sdr -t 172.17.0.8
default update method using onboard IPMI KCS interface
$ ./fw_upd.sh -i fru_sdr
8.3.4 SOL Firmware Upgrade
This section describes the SOL firmware upgrade via fw_upd.sh. It is part of the atca-
7350-fw-x.y.z-r
rpm package. Please ask your local sales representative for obtaining this
package.
SOL Firmware Upgrade
Follow the steps below.
1. Boot Linux on the ATCA-7350 blade or on a host blade with network access to a
'rmcp' capable shelf manager hosting the target ATCA-7350 to get a Linux shell
prompt.
2. Upgrade the firmware using the update script:
$ ./fw_upd.sh [-U <user>] [-P <password>] [-n <slot-
number>] [-s] [-t <rmcp-server>] -i <image_tag>
Example:
update method via ’rmcp’ server
$ ./fw_upd.sh -i sol_fw -t 172.17.0.8