Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 129)

BIOS
ATCA-7350 Installation and Use (6806800G59G) 129
The menu represented in the following table is used to configure MPS Configuration options.
NOTE: Bold text indicates default setting.
6.9.2.7 Remote Access Configuration Submenu
To access this submenu, select Advanced on the menu bar, and then Remote Access
Configuration.
The menu represented in the following table is used to configure Remote Access Configuration
options.
Table 6-11 MPS Configuration Submenu
Feature Options Description
MPS Revision 1.1
1.4 Select MPS Revision.
Table 6-12 Remote Access Configuration Submenu
Feature Options Description
Remote Access Disabled
Enabled Enable/Disable Remote access function.
Serial port number COM1 Select COM Port for remote access function.
Serial Port Mode 115200 8, n, 1
57600 8, n, 1
38400 8, n, 1
19200 8, n, 1
9600 8, n, 1 Select Serial Port settings.
Flow Control None
Hardware
Software Select Flow Control for console redirection.
Terminal Type ANSI
VT100
VT-UTF8 Select the target terminal type.