Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 127)

BIOS
ATCA-7350 Installation and Use (6806800G59G) 127
6.9.2.4 USB Configuration Submenu
To access this submenu, select Advanced on the menu bar, and then USB Configuration.
The menu represented in the following table is used to configure USB device options.
NOTE: Bold text indicates default setting.
6.9.2.5 IPMI 2.0 Configuration Submenu
To access this submenu, select Advanced on the menu bar, and then IPMI 2.0 Configuration.
Clear Event Log Discard all events in the event log.
ECC Event Logging Disabled
Enabled Enable/Disable ECC event logging.
Table 6-8 Event Log Configuration Submenu (continued)
Feature Options Description
Table 6-9 USB Configuration Submenu
Feature Options Description
USB Device Enabled Indicate the USB device attached to the system.
USB Functions Disabled
2 USB Ports
4 USB Ports
6 USB Ports
8 USB Ports Select USB ports used in system.
USB 2.0 Controller Enabled
Disabled Enable/Disable USB 2.0 function.
USB 2.0 Controller Mode FullSpeed
HiSpeed Select USB2.0 Mode.