Artesyn ATCA-7350 Installation and Use (September 2014) - Manual (Page 76)

Controls, LEDs and Connectors
ATCA-7350 Installation and Use (6806800G59G) 76
3.4.3 Onboard Jumpers
3.5 LEDs
The ATCA-7350 face plate provides the following LEDs:
 Out of service (OOS) LED
 In Service (IS) LED
 Attention (ATN) LED
 H/S LED
 HD LED
You can monitor the LEDs to diagnose the current status of the ATCA-7350.
Table 3-12 lists the LEDs on the ATCA-7350 face plate.
All the jumpers are only for debugging and manufacturing only. They should not be changed
by the customers.
Table 3-12 LEDs on the ATCA-7350 Face Plate
LED Color Meaning Description
Out Of
Service
(OOS) Red or amber Service status LED The OOS LED is set to on (red) when the
payload processor starts running.
Payload Management software is responsible
for controlling the OOS LED.
In Service
(IS) Red, green or
amber Health LED The IS LED is off when the payload processor
starts running.
Payload Management software is responsible
for controlling the IS LED.