ATEIS UAPg2 - Manual (Page 129)

UAPG2 MANUAL
Version EN.24
129
Protect the access to URC with Password
You can protect the access to the element of the URC with a Password.
To do this, you have to use the IDM (access to Master-Presets), not the UserID.
Open User->ID Management, and then create a new IDM associated with the Master-Presets.
Our advice is to use a very short user name and password, because it takes time to enter these
names with the knobs of the URC.
On the URC window click on
A window will open and display all the parameter created in the URC:
Then for each parameter, select
if you want it in the first layer
(not protected) or in the
protected layer.
Now, to access to the protected layer on the URC, the user will have to hold exit and back buttons
and push the knob. Then enter the IDM user, select [apply], enter the IDM password and select
[apply].