ATEIS UAPg2 User Manual
Page 13
UAPG2 MANUAL
Version EN.24
13
ADDITIONAL FEATURES
•
User-management: Up to 40 users with individual access rights, password protected
•
3
rd
Control table, with the addresses (names) and commands of all the control parameters
accessible via the RS232 serial port and through TCP/IP.
SCHEDULER
The scheduler allows planning of events (preset change, message play, close/open TTL out or change
component’s adjustments). Up to 128 different schedules can be scheduled. In one schedule you can
define up to 100 events.
MESSAGE PLAYER
The Message player incorporated into the UAPG2 allows you to play any kind of message to be
played. Two messages per UAPG2 can be run at a time. With the 100 Mbyte memory, the following
storage times are available in WAV format:
•
Format : 48kHz, 24kHz, 16kHz / 16 bits
•
Up to 53 minutes in 16 bits and 16 kHz sampling rate.
•
Up to 34 minutes in 16 bits and 24 kHz sampling rate.
•
Up to 17 minutes in 16 bits and 48 kHz sampling rate.
Caution : The message player cannot be used with the UAPg2 set at 96kHz. The UAPg2 must be set
at 48kHz.