ATEIS UAPg2 - Manual (Page 190)

UAPG2 MANUAL
Version EN.24
190
GEQ
You have three different GEQ modules, 1 Octave, 2/3 octave, 1/3 octave:
The control window of the 'GEQ' module is opened by a double click on the icon in the 'UAPG2'
design window and appears like this (example for 1/3 octave):
The display/editor window displays an output to input graph, where the vertical axis corresponds to
the output signal level in dB, while the horizontal
axis displays the frequencies. The green line reflects the currently set dynamic response graph of the
equalizer.
The small squares act as handles that can be dragged to the desired position and show the following
parameters (example: 4 bands):
• yellow Frequency (Hz)
Equalizer Parameters
Parameter Range Comment
Graph Open the graphic window
Bypass all  To bypass the EQ (all the frequency channel)
Bypass Bypasses only the selected frequency channel
Gain Set the gain of the frequency
Frequency show the frequency