ATEIS UAPg2 - Manual (Page 27)

UAPG2 MANUAL
Version EN.24
27
RAC (REMOTE ACCESS CONTROL)
Allow using analogue inputs for selecting a channel among 5 or 8 and setting the volume.
•
RAC5 - Wall-mounted level and 5 sources selectors
•
RAC8 - Wall-mounted level and 8 sources selectors
JB (JUNCTION BOX)
Easy chain connection of UAPG2 peripherals (URC and PPM), using standard CAT5 cables.
KEY FEATURES:
• 5 x RJ45:
1) Connection to previous JB (or UAPG2 bus on the first JB)
2) RS485-SIDE for URC connection
3) Easy connection to a Master PPM using the supplied 10 pins cable.
4) Connection to first Slave PPM (feature not available by now)
5) MAIN OUT connection to next JB
• 2 internal screw connectors for 0 dB audio:
•
audio output from PPM microphone --> Audio Output (connect to the Audio
In of the UAPG2)
•
audio input to PPM speaker --> Audio Input (connect to the Audio Output of
the UAPG2, if needed)
• 1 input for additional 24V power supply. (Depending on distance between UAPG2 and
PPM/URC you will have to put an external power supply)
• 1 internal switch for PPM Master or Slave selection. (Slave features are not available for
the moment)
• 1 internal switch for System or Local power supply selection.