ATEIS UAPg2 User Manual
Page 189
UAPG2 MANUAL
Version EN.24
189
PEQ
You have six different PEQ modules, 2, 4, 6, 8, 10, 16 bands:
The control window of the 'PEQ' module is opened by a double click on the icon in the 'UAPG2'
design window and appears like this (example for 6 bands):
The display/editor window displays an output to input graph, where the vertical axis corresponds to
the output signal level in dB, while the horizontal axis displays the frequencies. The green line reflects
the currently set dynamic response graph of the equalizer.
The small squares act as handles that can be dragged to the desired position and show the following
parameters (example: 4 bands):
•
orange Bandwidth (-)
•
yellow Frequency (Hz)
Parameter
Range
Comment
Symmetry
Not available on next versions
Bypass all
To bypass the EQ (all the frequency channel)
Bypass
Bypasses only the selected frequency channel
Bandwidth
Set the width around the frequency (Q factor)
Frequency
Selects the frequency to adjust
Gain
Set the gain (attenuate or increase the selected frequency)
Graph
Open the graphic window