ATEIS UAPg2 - Manual (Page 8)

UAPG2 MANUAL
Version EN.24
8
ATEÏS Field of applications
ATEÏS's audio systems have been installed into following markets:
- Railways
- Subways
- Airports
- High raise buildings
- Hotels
- Restaurants
- Shopping center and Malls
- Theme parks
- Places of worship
- Stadia
- Museums
- Industrial buildings
- Industrial plants
- Commercial buildings
UAPG2 G2 PRESENTATION
The ATEÏS UAPG288 G2 is the new generation of Universal Audio Processor developed by ATE ÏS.
Why Generation 2? Our developers completely re-design the old UAP88. Now the processor is the
state-of-the-art solution to meet almost all requirements of modern sound design in contemporary
applications. Designed for
Commercial application , the UAPG2 is the new DSP audio Matrix for
medium paging application and multi zone audio routing.
According to its powerful audio numerical signal treatment the
UAPG2 can easily be used in an
exigent environment requiring audio quality.
Thanks to its Ethernet port you can easily connect and pilot the UAPG2 through an IP network or
direct from a PC by using RJ-45 connector.
UAPG2's programming is done through convivial software based on graphical Windows® design
environment. The signal path is defined by adding DSP components (Equalizer, Gate, Compressor,
delay...), simply inserted in a clear and easy graphical window by "drag en drop" operation. You can
recreate a complex audio system in a simple 1U space machine. Forget the addition of machines that
required racks and too much long cables in the past.
Once programmed, you can pilot your system through PC, VITY, Crestron or AMX. You can also
disconnect the PC and the networked devices run as a standalone system; however it can be
controlled through a range of controllers (logical TTL Input, logical TTL Output, analogical inputs,