ATEIS UAPg2 - Manual (Page 36)

UAPG2 MANUAL
Version EN.24
36
Third Party control
Opens the Third Party Control window in the PROPERTIES CONTROL AREA
This section shows you all the detail of all the elements or events which are designated to be
controlled via third party device (Crestron, AMX, VITY, …)
Two different TABS,
One to show the Elements controlled via third party protocol:
The second to show the Events controlled via third party protocol
For more information, see the “HOW TO: use the Third Party Control” chapter of this manual.
Logic in
Opens the Logic IN Control window in the PROPERTIES CONTROL AREA
You have a lot of possibilities to use the 16 controlled inputs (either analogue or Logic) If you need to
use Logic inputs you can control and do a lot of different things. Following windows shows you the
details of what is controlled and what you are doing with Logic input:
1) The contact input must be assigned to a group to be available.
You can also use Logic inputs as “bit” for different choice (not available at the moment).
2) You can use Logic input in order to change preset: