ATEIS UAPg2 User Manual
Page 97
UAPG2 MANUAL
Version EN.24
97
By default the PPM has two chimes in his internal memory, click on the "active" box and select which
chime you want by clicking in the "Index" field.
When all the settings are Ok, the PPM is ready to be used like any other kind of input sources. To
learn how to configure the system in order to control the access of the sound to various areas
through the PPM’s keys, see the "define paging with PPM" chapter.
Rear PPM adjustments
At the rear of the PPM you can adjust level of mic, speak or chime.
You can also have additional keys with PPM KEYPAD (the connector is on the left of the picture)
Assign chime to PPM
You can upload maximum 128Kb (of wave files 16 bits 16 kHz mono) in a PPM,
If you want to have several chimes in a PPM then you must store all of them together in the same
time.
There are three steps to load chime to a PPM:
1) Select chime
2) Load chime (Wave files) in the PPM
3) Adjust PPM's chime