ATEIS UAPg2 - Manual (Page 90)

UAPG2 MANUAL
Version EN.24
90
Use Master-Preset / Sub-Preset
Master preset allows storing of several different DSP design in a same configuration. For example if
you have room which can be separated into two smaller sized rooms etc.
Sub Preset allows you to store different adjustments (Level, mute) but not (as Master preset) to
change DSP design (change routing, modules...)
Master preset
Master preset allows storing of several different DSP design in a same configuration.
: Indicates which current Master Preset you are working with.
: Names each Master Preset
: Add or Delete Master Preset
1) Define (Add and Name) the number of Master Preset that you need.
2) Select the Master Preset you want to work with and make your design.
3) Do the same for each Master Preset
To change Master preset simply change the current Master preset when the PC is connected, or use
URC or Logical connectors (see corresponding How to... chapter to know how to proceed)
Sub preset
Sub Preset allows different predefined adjustments (Mute, Volume,...) in a same Master Preset. But
you cannot change the design as in the Master Preset.
: Name of the current Sub Preset
: Add (+) or Delete (-) a Sub Preset
: Manages Sub Preset name
: Saves (<) or Load (>) Sub Presets
Example of use:
For example we are going to define two sub-presets:
- the first with all the C inputs on +20dB (Sub preset's name: A + 20dB).
- the second with C inputs set to -90dB and Mute on (Sub preset's name: A mute).
1) Define the two subpresets. Click twice on the (to add two sub Preset)