ATEIS UAPg2 - Manual (Page 143)

UAPG2 MANUAL
Version EN.24
143
Set TTL-Out
This event pilot a Logic output of any UAPG2 of the system.
Create an event which control TTL out (control type) then click in the Mount field of this event
Select which output of which UAPG2 (if several UAPG2 in a system) will be open (and also the time of
(kind of pulse capability)
Enable: Notch it to active the Logic output channel.
Process Time Enabled: If not notched, the process time will be ignored.
The pulse will start directly.
Process Time: Time before the beginning of the first pulse.
Process Period Enabled: Notch this option if you want have cyclic pulses.
If not notched, the pulse will be permanent.
Process Period: Select here the time of the period.
Logic: If notched, the default value during the process time is "1". The pulses are inversed.
Note: be sure to click [save] to enable your action.