ATEIS UAPg2 - Manual (Page 34)

UAPG2 MANUAL
Version EN.24
34
View
In this topic you will find practically every windows of the software. Most part of those windows has
short access from the TOOL BAR. We are going to introduce you every items. To learn how to use
those items please refer to the “create a project” and “how to” sections.
The View menu contains the following items:
•
System
•
Components
•
System status
•
Third Party Control
•
Logic in
•
Logic out
•
Analog in
•
Subpreset List
•
Remote List
•
PPM Manager
•
Chime Data Store
•
Wave File Manager
•
PPM vs Wave Table
•
Logo Manager
•
Logo Lobrary
•
Event Management
•
Schedule Management
•
Virtual Control
•
Monitor
•
Monitor Settings
•
Toolbars
System
Opens the system window, in the DESIGN COMPONENTS AREA
You have to explain to the software which Hardware will be used for
you project. Here you can find the virtual system machines:
•
The processor (UAPG2)
•
The paging microphone (PPM)
•
the remote controller (URC)
When you define your system you will drag and drop those virtual machines in the WORKING AREA.
For example if you use three linked UAPG2 you will drag and drop three virtual UAPG2 from this
window. Then if you use PPM you will drag and drop virtual PPM and “virtually connect” them in
desired inputs of the virtual UAPG2s (be sure to connect them in the same way as the hardware).