Beisler 100-54 - Manual (Page 18)

1-16
3. Loosen the fixing screw (A) of the guiding head (B).
4. Pull the guiding head (B) downwards out of its locking (already happened
in the picture).
5. Mount guiding head and folder in reverse order.
4.1.12 Change vylene roll
The vylene roll is located below the working table and can be changed this
way:
1. Swing out the insertion station (see section 4.1.10).
2. Lift the insertion plate at its front and push it to the left.
3. Remove all vylene rests which are still in the machine.
4. Insert a new vylene roll.
5. Insert the vylene over the roll into the vylene guiding.