Beisler 100-54 - Manual (Page 49)

2-27
No. Description Gauge Cylindre Occupation
No. No. Status
18 Lift pocket pouch supply Y18 18 X37 pin 10 (100-54 only)
19 Drive in pocket pouch supply Y19 19 up X37 pin 09 (100-54 only)
30 Pocket pouch supply clamp Y30 30 X35 pin 08 (100-54 only)
52 Trouser smoothing device Y52 52 X37 pin 16 (100-56 only)
44 Piping cutting knife Y44 44 X25 pin 27, X49 pin 31
45 Piping cutting short/long Y45 45 X37 pin 12, X39 pin 32
46 Piping cutting centre stop Y46 46 X37 pin 13, X49 pin 33
55 Clamp insertion plate Y55 55 X37 pin 11
Machines with sloping
47 Breast welt guiding head Y47 47 X35 pin 07 (100-55 only)
12 Mitre knife centre stop Y12 12 X35 pin 03 (100-55, -56 only)
05 Left mitre knife seam end Y05 05.1 X35 pin 01 (100-55, -56 only)
06 Left mitre knife seam start Y06 06 X35 pin 02 (100-55, -56 only)
53 Needle switch-off right Y53 53 air-free X35 pin 04 (100-55, -56 only)
54 Needle switch-off left Y54 54 air-free X35 pin 05 (100-55, -56 only)
Machines with piping pull-through
56 Piping pull-through push plate Y56 56 X35 pin 04
57 Piping pull-through seam end Y57 57 X35 pin 02
58 Piping pull-through seam start Y58 58 X35 pin 01
59 Piping pull-through pinple up Y59 59 X35 pin 03
5.5.2 Diagnostics
1. Press the P-key.
2. Press the F6-key.
3. Press the F3-key.
Here you can choose from six different sub-menus, with which you are able
to check system components individually.
5.5.2.1 Service Test
ATTENTION
These tests may only be executed by service technicians of the company
Beisler. The complete loss of all data can easily occur due to false
operations.
5.5.2.2 Sewing motor
1. Press the P-key.
2. Press the F6-key.
3. Press the F3-key.
4. Press the F2-key.
Here, four tests for the sewing motor are contained. Select the desired test
by pressing the corresponding F-key: