Beisler 100-54 - Manual (Page 7)

1-5
development and permanent improvement of their products. In the case of
faults and/or technical trouble please contact the Beisler GmbH service staff.
We assure that suitable measures will be done immediately.
The Beisler GmbH guarantee regualtions are valid, which we will send to you
on demand.
2.3 Guarantee regulations
We guarantee the fault-free functioning of the Universal-Pocket-Piping-
Machine 100/55/56 according to this operating manual except the tools for a
time range of six months after delivery. If the machine is used in double- or
triple-shift operation, the term of guarantee is reduced to three or two
months.
The term of guarantee starts with the date of delivery to the customer,
independant from the time of putting into operation. Guarantee will be
spoiled, if the machine isn’t installed and operated according to this operating
manual and the regulations given by the Beisler GmbH staff. A cost-free
repair is only possible, if all regulations considering storage, transportation
and putting into operations have been obeyed.
Customers and third persons may only mesh with the machine after getting a
written approval by the Beisler GmbH. The Beisler GmbH takes no
responsibility for injuries and damages arising from non-obeyance of this
stipulation. All warranty will be spoiled in this case.
The Beisler GmbH takes no responsibility for faults of the machine as
consequence of defective or functional faulty equipment in the surrounding of
the machine or by the use of accessoires, which were not delivered by the
Beisler GmbH.
The general conditions of sale and delivery of the Beisler GmbH are valid.
2.4 Use as agreed
The Universal-Pocket-Piping-Automaton 100/58 has been developed for the
piping of pockets and the sewing in of pocket bags.
Danger
This machine has been developed and build for a certain purpose. Adaptions
may influence security equipments negatively. We recommend to contact our
service staff in such a case.
2.5 Description of the machine
The Universal-Pocket-Piping-Automaton 100/58 allows the automatic piping
of pockets. The machine is equipped with a cutting device, a clamp
transportation system, a sewing head and a stacking system for the
produced pieces.
All components of the machine are mounted on a base frame made of
square steel pipes and controlled by an innovative micro-processor system.
Machine operation is achieved with an operation device. Here you can open
several control programs, define new programs and check all machine
components individually for maintenance and repair duties.