Beisler 100-54 - Manual (Page 57)

3-3
5.3.6 Arrangement of the mitre knife during flap pocket production ............................ 3-27
5.4 Split needle (Beisler sewing head) ..................................................................... 3-27
5.4.1 Distance to cylinder of the top threat catcher ..................................................... 3-27
5.4.2 Center adjustment ............................................................................................. 3-27
5.5 Vylene adjustments ............................................................................................ 3-27
5.5.1 Correct vylene adjustment ................................................................................. 3-27
5.5.2 Demount vylene plate ........................................................................................ 3-28
5.5.3 Change cutting pressure .................................................................................... 3-28
5.5.4 Adjust vylene supply .......................................................................................... 3-28
5.5.5 Easy-running of the vylene roll ........................................................................... 3-28
5.5.6 Vylene supply speed .......................................................................................... 3-28
0.1 Reason for this manualsystems.
With this manual, especially qualified and authorized persons shall be
enabled to execute further adjustment and maintenance duties at the
Pocket-Piping machines 100-55/56 manufactured by Beisler. Even these
persons will first have to read and understand the documentation and obtain
all rules and regulationscompleteManometer 3) ein.
0.2 Structure of the manual
This manual is structured in two columns. On the left side you will find
explaining texts, on the right side photos which illustrate the texts and show
certain assemblies or parts of the machine
0.3 Safety instructions
Many of the measures described in this manual can be executed at a
machine powered-off and with released air-pressure. Please obtain the
switch-off procedures described below. Some of the measures described in
this manual can only be executed, if the machine is under electrical power or
air pressure.
DANGER
ever work alone! Assure that a second person is present which can initiate
ife-saving actions and/or calls for paramedical help in the case of an
accident.
DANGER
Danger of mortal electrical shock! While working at a machine where
electrical voltage is present, any contact to hot parts must be avoided.
DANGER
Danger of shearing and crushing! Be very careful working at a machine
which is under pneumatical pressure. Otherwise, unintented moves of
machine components could cause severe injuries.