CITIZEN MG0000 - Manual (Page 103)

32
Dive Type
The dive type can be changed for data that has been transferred from Hyper Aqualand.
The dive type cannot be changed for data that has been transferred from CYBER AQUALAND.
Location
Data is displayed that was registered in the <Location Initial definition> of <Dive Locations> .
When the button is clicked with the mouse, a list of registered locations is displayed, and a
location can be selected from that list. In addition, a location can also be registered by entering from
the keyboard.
Dive Site
Data is displayed that was registered in the <Dive Site Initial definition> of <Dive Locations>.
When the button is clicked with the mouse, a list of registered dive sites is displayed, and a dive
site can be selected from that list. In addition, a dive site can also be registered by entering from the
keyboard.
D. Service
(Diving Service)
Data is displayed that was registered in the <Diving Service Initial definition> of <Fixed Items>.
When the button is clicked with the mouse, a list of registered diving services is displayed, and a
diving service can be selected from that list. In addition, a diving service can also be registered by
entering from the keyboard.
Diver
Data is displayed that was registered in the <Default diver> of <Fixed Items>. When the button is
clicked with the mouse, a list of registered divers is displayed, and a diver can be selected from that
list. In addition, a diver can also be registered by entering from the keyboard.
Dive Master
Data is displayed that was registered in the <Default dive master> of <Fixed Items>. When the
button is clicked with the mouse, a list of registered dive masters is displayed, and a dive master can
be selected from that list. In addition, a dive master can also be registered by entering from the
keyboard.
Buddy
Data is displayed that was registered in the <Default buddy> of <Fixed Items>. When the button
is clicked with the mouse, a list of registered buddies is displayed, and a buddy can be selected from
that list. In addition, a buddy can also be registered by entering from the keyboard.
Safety Stop Enter the depth and time as numerical values.
Weather
A list of weather conditions registered with <Fixed Items> is displayed when the button is clicked
with the mouse, and a weather condition can be selected from that list. In addition, weather
conditions can also be registered by entering from the keyboard.
Temp. Enter the air temperature as a numerical value.
Visibility Enter the visibility as a numerical value.
Dive Style
A list of dive styles registered with <Fixed Items> is displayed when the button is clicked with the
mouse, and a dive style can be selected from that list. In addition, a dive style can also be registered
by entering from the keyboard.
Water Cond.
(Water Condition)
A list of water conditions registered with <Fixed Items> is displayed when the button is clicked
with the mouse, and a weather condition can be selected from that list. In addition, water conditions
can also be registered by entering from the keyboard.
Tank Capacity Enter the tank size as a numerical value.
Pres. In (Pressure In) Enter the starting pressure of the tank as a numerical value.
Pres. Out
(Pressure Out)
Enter the ending pressure of the tank as a numerical value.
Tank Consump.
(Tank Consumption)
When the button is clicked with the mouse when <Pres. In>, <Pres. Out>, <Ave.
Depth> and <Dive Time> have been registered, the rate of surface air consumption is calculated. In
addition, Consump. only can also be registered since values can be entered from the keyboard.
Dives for which the rate of surface air consumption can be calculated by AQUALAND GRAPH 2001
are those of an average depth of 39 m or less and dive time of 30 seconds or more. Since the rate of
surface air consumption is calculated in 1 minute units, the dive time used for calculation is rounded
down for 0-29 seconds or rounded up for 30-59 seconds.