CITIZEN MG0000 - Manual (Page 58)

2. Installation
A. Installing the USB Driver
Install the USB driver from the CD-ROM provided by following the procedure described
below. The procedure differs slightly depending on the compatible OS.
* The displays used in the explanation differ depending on the OS language and version.
The explanation here uses the example of an English language OS.
Windows98 or Windows98 SE:
(1) Turn on the power of the PC and confirm that Windows98 or Windows98 Second Edition
has started up.
(2) End any applications that are currently running on the PC.
(3) Place the CD-ROM provided in the CD-ROM drive of the PC. If the AQUALAND GRAPH
2001 installation menu is displayed at this time, click on the "EXIT" button to close this
menu.
(4) If the communication unit is connected to
the USB port of the PC, a message is
displayed on the PC indicating that new
hardware has been detected and that the
PC is searching for the required application
software. Once this check of new
hardware is completed, the "Add New
Hardware Wizard" is displayed.
(5) After confirming the contents, click on
"NEXT" to display the screen shown at
right.
(6) Check that "Search for the best driver for
your device" has been selected and then
click on "NEXT". The display changes to
the screen shown at right.
58