CITIZEN MG0000 - Manual (Page 32)

B. Timer Measuring Procedure
(1) The timer is repeatedly started and stopped each time button (B) is pressed.
(2) The watch returns to the setting display when button (C) is pressed while the timer is
stopped.
* The alarm that sounds when the time is up can be turned off by pressing any button.
* Only "Timer" appears on the display to indicate that the time is up when the time up alarm has
been set to "Silent".
* The watch automatically returns to the time mode after about 3 minutes have passed during
the timer setting display.
* The watch returns to the surface mode when none of the buttons have been pressed for about
3 minutes in the timer mode (including during timing) when the surface mode has been
activated (while resting on the surface).
* If the mode is switched to the dive mode, infrared communication mode or low power mode
during timing, timing is interrupted and the watch returns to the setting display.
<Repeating Measurement>
The timer is instantly returned to the setting display and resumes timing when button (C) is
pressed during timer measurement.
32
(B)
(B)
(C)
(C)
(B)
Setting display Timing
Stop
Time up