CITIZEN MG0000 - Manual (Page 16)

Features
This watch is provided with numerous convenient
functions used during diving.
•
Various information is displayed to serve as a reference for safe diving by calculating
residual body nitrogen based on depth during diving, dive time and previous dive
history, etc. (Dive Computer Function).
* Decompression Calculation Algorithm
This watch employs the calculation formula of the Canadian Defense and Civil Institute of
Environmental Medicine (DCIEM).
•
Measurement of water depth begins automatically simply by placing the watch on your
wrist and entering the water, and various data (depth, elapsed time, etc.) are measured
automatically while diving.
•
This watch distinguishes between skin diving and scuba diving according to diving
conditions (depth and dive time), and a maximum of 100 sets of log data are
automatically recorded for both types of diving.
•
This watch is also provided with various warning functions necessary for safe diving.
•
Log data and profile data (up to 2 hours) automatically recorded in the watch can be
transferred to a PC by using the communication unit and infrared communication
function provided, making it possible to easily manage and generate graphic
representations of transferred data on your PC.
Various watch functions can be set on your PC.
•
The following watch settings can be transferred to and edited on your PC using the
communication unit and infrared communication function provided.
• Addition, deletion and alteration of locations displayed in each mode by the watch
• Various travel time, alarm and destination timer settings
• Setting of dive alarm used during diving and entry of the number of previous dives.
• Setting of daily graphics and graphics displayed on anniversaries (graphic display)
This watch is also equipped with an infrared
communication function.
•
The wrist watch infrared communication standard (IrWW) is used for infrared
communication. This enables the time and alarm time to be set between watches using
this standard.
•
If a friend or acquaintance has the same watch, data can be transferred between those
watches (including time, date, alarm and dive alarm settings). In addition,
communication with a PC can also be performed using infrared communication.
No need to change the battery.
•
The secondary battery used for the power source is completely free of mercury and
other hazardous substances making it environmentally friendly.
•
The secondary battery is charged using the communication unit provided. Once fully
charged, the watch can be used continuously for about one month under standard
operating conditions. (Continuous usage time varies according to the use of additional
functions and other conditions of use. For further details, refer to the section on " Battery
Charge Indicator and Continuous Usage Time".)
•
This watch is also equipped with a battery charge indicator that provides a general
indication of the charge level of the secondary battery, as well as an insufficient charge
warning function that informs the wearer that the secondary battery is insufficiently
charged on the display.
16