Destination timer mode – CITIZEN MG0000 User Manual
Page 26
C. Interchanging Locations Between Travel Time Mode and Time Mode
When a location in a time zone that is frequently used is set in the travel time mode, and
this interchanging procedure is performed after having arrived at that location, the time
and date of the location displayed in the travel time mode can be displayed in the time
mode. As a result, the time and date of the location that had been displayed in the time
mode is now displayed in the travel time mode.
<Procedure>
Press buttons (B) and (C) simultaneously for at least 2 seconds in the travel time mode.
The location in the time mode and location in the travel time mode are interchanged and
the watch displays the time mode.
Example: Location set in time mode (main time): TOKYO
Location set in travel time mode: LONDON
3. Destination Timer Mode
The destination timer measures and displays the amount of time remaining until arriving at
a destination up to a maximum of 99 hours, 59 minutes and 59 seconds after having set
the destination and arrival time when traveling or on business overseas. Once the arrival
time is reached, an alarm informing you of arrival sounds for about 30 seconds and "Dest"
is displayed on the display. After arrival, elapsed time from the time of arrival is measured
for up to 99 hours, 59 minutes and 59 seconds.
In addition, the alarm informing you of arrival at your destination can be selected from 15
types of alarm sounds.
26
[Before
interchanging]
[Arrival Time
Display]
Destination
Arrival time
Remaining time
Current time in
time mode
Display of location
before interchanging
Display of location
after interchanging
[During interchanging]
Buttons (B) and (C) for at least 2 seconds
[After interchanging]
(
C
)
(
B
)
(
D
)
(
A
)
(
C
)
(
B
)
(
D
)
(
A
)
[Remaining Time Display
(during measurement)]