Bottom margin, Top of form, Selecting the paper path – Compuprint 9060LA User Manual
Page 109
105
Bottom Margin
The
BOTTOM MARGIN
Option gives you the possibility to set the bottom margin with the number
of the line (numbered from the top paper edge) where the printing actually stops for a given
page.
The setting of this Option depends on the setting of both the
VERTICAL PITCH
and the
FORM
LENGTH
Options (see the corresponding related sections in this chapter).
The Values range from the Value for
TOP MARGIN
to the Value for
FORM LENGTH
.
Top of Form
The
TOP OF FORM
Option is used to set the Top of Form position. See the print area definition,
" section. This Option is useful when printing on preprinted forms, where a
precise positioning is required. The selectable Values range between 0/60 and 140/60 inches. The
Factory setting is
0/60 inch
.
S
S
e
e
l
l
e
e
c
c
t
t
i
i
n
n
g
g
t
t
h
h
e
e
P
P
a
a
p
p
e
e
r
r
P
P
a
a
t
t
h
h
You can set the
PAPER PATH
Option to select the paper path used with a given Macro.
Remember that you can also select the paper path you want using the operator panel buttons.
This Option is available only if the
PATH AT POWER-ON
Option of the
INSTALLATION
Function is
set to From Macro. See "C
Value
Definition
Push-Front1
The paper is loaded using the tractor in Front1 position.
Push-Front2
The paper is loaded using the tractor in Front2 position (option).
ASF1, ASF2, ASF3
Paper is loaded using one of the ASF bins (option).