Compuprint 9060LA - Manual (Page 44)

40
Using the Operator Panel
The Path button on the operator panel is used to select the paper path you want to use. To select
a paper path using the operator panel:
1. Press the Path button.
The indicator corresponding to the currently selected path starts blinking. The display shows
the paper path name.
2. Press the Path button again.
The Path indicators light up one after one another. Only the indicators of the available paths
light up, i.e. those for which the corresponding tractor unit is installed.
Simultaneously, the display reads the corresponding paper path names.
3. Once the indicator corresponding to the paper path you want to select is lit, release the
button.
Automatic paper handling operations depending on your choice are performed after a time-
out.
If the new selected path is out of paper, the corresponding indicator blinks.
The printer will load the paper corresponding to your new paper path selection only when
receiving data.