Compuprint 9060LA - Manual (Page 99)

95
Setting the Serial Interface
Disconnection on Fault
The DISCON. ON FAULT Option defines the DTR line behavior for any fault condition detected
by the printer.
Value Definition
No discon. The DTR line does not change.
Yes (DTR drop) The DTR line is dropped to low signal level.
Yes (DTR pulse) The DTR line is pulsed to high signal level with a 5 sec pulse.
Word Length
The WORD LENGTH Option allows you to determine the data format.
Value Definition
8 bit The data are coded using 8 bit.
7 bit The data are coded using 7 bit.