Compuprint 9060LA - Manual (Page 29)

25
Rolling messages
Message Meaning
1.Check paper
2.Press Pause These messages are displayed during the initialization of the printer,
when the Push+Pull paper path is selected. The user should check that
the paper has been correctly loaded and confirm by pressing the
Pause
button.
1.Paper->Pull
2.Press Pause These messages are displayed during the paper loading procedure for the
Push+Pull paper path. The user should install the paper and confirm by
pressing the
Pause button.
1.Power-off
2.Push -> Front2 These messages are displayed when the Push-Front2 paper path is
selected and the tractor is not installed in the Front2 position.
Power the printer off and install the Push Front2 tractor option.
1.Tear-off paper
2.Park Paper The printer was not able to park the paper, because it is too long. It
indicates that the paper should be torn-off and then parked again.
Carriage error
Check its moving The print head carriage is not moving correctly. Open the top cover and
check if there is anything blocking the carriage.
Comm. Failure
Check line Communication error. The DSR signal is not present on the serial
interface. Clear the error by pressing the
Pause button twice, then check
if the communication parameters for the serial interface are set correctly.
Data lost
Check interface Data has been lost due to incorrect interface settings. Check the
interface parameters in the printer Set-Up.
Print gap: Manual
Adjust print gap Displayed when exiting from the printer Set-Up and the PRINT GAP
Option has been set to Manual adjust . See "C
C C u
u u s
s s t
t t o
o o m
m m i
i i z
z z i
i i n
n n g
g g M
M M a
a a c
c c r
r r o
o o s
s s " for
more details.