Compuprint 9060LA - Manual (Page 63)

59
Selecting the Font
The Font button allows you to select one of the following resident fonts:
Draft –Courier - Roman - Sans Serif - Prestige - Script - Orator - OCR-A - OCR-B
You can also select the SoftContrl (Software Control) Value. Software Control means that the
font that is used by the printer is defined through the commands of your software application.
This message blinks alternately with the Font that will be used if the printer receives no
software command.
To select a resident font:
3. Press the Font button.
4. Within 3 seconds press the Font button, until the desired font is displayed (keeping the button
depressed displays the different fonts continuously).
Three seconds after releasing the button, the display shows the basic screen again and the
font is set.
If a font is selected using the Font button, it is locked and cannot be changed by software
commands. The basic screen then shows the Lock symbol.
The font selection made using the Font button is canceled as soon as you power-off the printer.
To return to Software Control, press the Font button, until SoftContrl is displayed.