Fluke Biomedical ESA612 - Manual (Page 17)

Electrical Safety Analyzer
Safety Information
3
Safety Information
In this manual, a Warning identifies hazardous conditions
and actions that could cause bodily harm or death. A
Caution
identifies conditions and actions that could
damage the Analyzer, the equipment under test, or cause
permanent loss of data.
 Warning
To avoid possible electrical shock or
personal injury, follow these guidelines:
• Use this Analyzer only in the manner
specified by the manufacturer or the
protection provided may be impaired.
• Read the Users Manual before operating
the Analyzer.
• Do not connect the Analyzer to a patient or
equipment connected to a patient. The
Analyzer is intended for equipment
evaluation only and should never be used
in diagnostics, treatment or in any other
capacity where the Analyzer would come
in contact with a patient.
• Do not use the product in wet or damp
locations, around explosive gases or dust.
• Inspect the Analyzer before using it. Do
not use the Analyzer if abnormal
conditions of any sort are noted (such as a
faulty display, broken case, etc.)
• Inspect the test leads for damaged
insulation or exposed metal. Check test
lead continuity. Replace damaged leads
before using the Analyzer.
• When testing, always be sure to keep your
fingers behind the safety barriers on the
test leads.
• Never open the Analyzer's case.
Dangerous voltages are present. There are
no user replaceable parts in the Analyzer.
• Have the Analyzer serviced only by
qualified personnel.