Compliance and safety – FSR HuddleVU User Manual
Page 2
2
Huddle-VU
COMPLIANCE AND SAFETY
PROPRIETARY INFORMATION
All information in this manual is proprietary to and the property of FSR Inc. This publication is protected
by the Federal Copyright Law, with all rights reserved. No part of this document may be reproduced, tran-
scribed, or transmitted, in any form or by any means, without prior explicit written permission from FSR Inc.
OPERATOR’S SAFETY SUMMARY
The general safety information in this summary is for operating personnel.
Read Instructions. Read and understand all safety and operating instructions before using this equipment.
Keep the instructions handy.
Removal of the top cover may expose dangerous voltages. To avoid personal injury, disconnect all power
sources before removing the top cover. Do not operate the unit with the cover removed.
Power Source:
This product is intended to operate from the power source detailed in the specifi cation section of this manual.
Do not use any other power source or exceed voltage limits.
Grounding the Product:
This product is grounded through the grounding conductor of the power cord. To avoid electrical shock, plug
the power cord into a properly wired receptacle before connecting to the product input or output terminals.
Use the Proper Power Cord. Use only the power cord and connector specifi ed for your product. Use only a
power cord that is in good condition. Refer cord and connector changes to qualifi ed service personnel.