FSR HuddleVU - Manual (Page 31)

31
Huddle-VU
CONNECTION REQUEST
The CON request is used to connect an input to the monitor. Only one input can be connected at any one
time. The specifi ed input causes the HV-CTL to confi gure the 4x1 HDMI switchers appropriately.
CON <input_to_connect> | <"?"> <cr>
Syntax:
CON < input_to_connect > | <"?"><cr>
Where:
CON Connection request header
input_to_connect = 1,2,3,4,5,6 or 7.
"?"
to query the current input setting.
Example:
To connect input 2 to the monitor:
CON 2<cr>
To query the currently connected input:
CON ?<cr>