FSR HuddleVU - Manual (Page 39)

39
Huddle-VU
STATUS REQUEST
The STA request returns the current source input and monitor status.
STA <cr>
Syntax:
STA<cr>
Where:
STA request header
Response: STA CON = <source_input> PWR <monitor_status>
Where:
source_input = currently connected source input, 1-7.
monitor_status = current monitor status, ON or OFF.
Example:
STA<cr>
To which the HV-CTL will respond if current source input is 5 and power is on:
STA CON = 5 PWR ON HV-CTL 01.02