FSR HuddleVU - Manual (Page 8)

8
Huddle-VU
1. LOOSEN BASE PLATE SCREWS AND SEPARATE
BASE PLATE FROM TABLE BRACKET. DETERMINE
EQUIPMENT LOCATION AND MOUNT TABLE
BRACKET TO UNDERSIDE OF TABLE WITH
SUPPLIED #8 WOOD SCREWS OR CUSTOMER
SUPPLIED #8 COUNTER-SUNK HARDWARE.
TABLE BRACKET
(4) #8 COUNTER-SUNK HARDWARE
2. REMOVE AND DISCARD EXISTING SCREWS FROM
HV-CTL UNIT.
3. INSTALL HV-CTL TO BASE PLATE WITH SUPPLIED
#6 HARDWARE.
HV-CTL
REMOVE AND DISCARD
BASE PLATE
TABLE
(4) #6-32 x 3/8" LONG
HUDDLEVU BRACKET SET INSTALLATION