FSR HuddleVU - Manual (Page 28)

28
Huddle-VU
HUDDLE VU SERIAL COMMANDS
The HV-CTL supports a serial command interface that allows the user to confi gure the HV-CTL and to query
current status via User Serial Port 2. Some of the commands duplicate the functionality available via the
switch inputs, allowing the user to set the current source input and power the monitor ON or OFF. (See below
for a complete description of the available commands.)
HV-CTL REQUEST LIST QUICK REFERENCE
REQUEST DESCRIPTION
CON Connect specifi ed input to HDMI output.
HLP Provides help information for HV-CTL command set.
LOCK Lock a specifi ed input from switch recognition.
PWR Controls the state of the HV-CTL switched AC receptacles and AUX relay output.
RLY Controls the state of the HV-CTL switched AC receptacles and AUX relay output.
RSP Enable/Disable a response from HV-CTL to a command.
SBR Confi gure serial bit rate of serial ports 1 or 2.
STA Request status of currently connected input and power.
UNLOCK Unlock a specifi ed input for switch recognition.
VER Request current part # and version number.
VRB Turns on/off verbose command error reporting.