FSR HuddleVU - Manual (Page 43)

43
Huddle-VU
DV-HSW-41 PINOUTS AND CABLING
DB-9 CONNECTION
Please see the HuddleVU serial protocol manuals included with the product for serial commands and other
details on RS-232 control. Use a null modem cable for controlling.
RS-232 HARDWARE CONFIGURATION
BAUD RATE 38400
DATA BITS 8
STOP BITS 1
PARITY NONE
FLOW CONTROL NONE
PORT 2 RS-232 / DB-9 socket
1.N/C
2.RX (Receive data) (Input)
3.TX (Transmit data) (Output)
4.N/C
5.GND (Signal return)
6.N/C
7.CTS (Clear to send) N/C
8.RTS (Request to send) N/C
9.N/C
NOTE:
The HuddleVU serial ports are confi gured as
"DTE" and connect to the HDMI switchers
with a null modem cable, since the switchers
are also confi gured as "DTE".
If connecting to a control system or computer
serial port that is also DTE, you will need to
use a null modem cable.