FSR HuddleVU User Manual
Page 27
27
Huddle-VU
The user may also LOCK or UNLOCK ALL inputs simultaneously.
POWERING THE MONITOR ON/OFF SERIALLY
The HV-CTL also allows the user to power the monitor ON/OFF via the serial interface (see command
description below).
The user may power the monitor ON via the serial PWR ON command. The behavior of the LEDs when the
monitor is powered ON or OFF is the same as that when it is powered on via the appropriate switch input
previously described. That is, when powered OFF, the HV-CTL LEDs will all fl ash RED for a short duration
and then all LEDs will be unlit, thereby indicating the monitor is powered OFF. When powered ON, the
HV-CTL LEDs will all fl ash GREEN for a short duration and then return to the status indicating the current
source input lit GREEN with all other inputs either RED or unlit (indicating the switch input is locked).