Gasboy PLUS FMS - Manual (Page 17)

MDE-5067 FedEx Islander PLUS FMS Installation Manual · March 2013 Page 3-7
Installing FedEx Islander PLUS FMS
Installing Islander PLUS
To install the Islander PLUS, proceed as follows:
1 After lag bolts are inserted in the island, position the base plate over the lag bolts, wide-side
facing front. The pedestal is then placed over conduit and into the base plate. To avoid
pinching wires, two technicians are required for this step. Tighten the nuts over the lag bolts to
secure to the island (see
Figure 3-5 ).
Figure 3-5: Installing Islander PLUS