Appendix a: commissioning – Gasboy PLUS FMS User Manual
Page 61
MDE-5067 FedEx Islander PLUS FMS Installation Manual · March 2013
Page A-1
Appendix A: Commissioning
Appendix A: Commissioning
*All installations for the FedEx Islander PLUS FMS require signed verification that the
installation is complete and the customer is satisfied. Per the ASC Notification Letter, no
payment will be remitted to the installer until required documentation is received.
AC Power confirmed to be within specification. Test at Idle. For more information, refer to
.
Neutral to Ground: measured at: ______________ (fill in value).
Hot to Ground: measured at: ______________ (fill in value).
Hot to Neutral: measured at: ______________ (fill in value).
AC Power confirmed to be within specification. Test at load (ALL PUMPS ON). For more information,
refer to
“Pre-installation Power Inspection”
.
Neutral to Ground: measured at: ______________ (fill in value).
Hot to Ground: measured at: ______________ (fill in value).
Hot to Neutral: measured at: ______________ (fill in value).
Fleet Manager trained in operation and manual bypass.
FiPay Server ground cable installed.
Program the SiteOmat.
Reboot SiteOmat.
Pumps and oil reels blocked and unblocked as needed.
Set up networking in the FiPay Server.
Set up T-Check information in the FiPay Server.
Perform all tests per the
.
Commission equipment with Gilbarco claims via the Gilbarco extranet
(
), log into your account. If you do not currently have access
to the extranet, see your company gatekeeper for a username and password.
The Gasboy Fleet Plus system is operational and equipment has been commissioned with the
Gilbarco Claims Department.
Signature of Installer: _______________________________________________
Signature of Fleet Manager/Director: ________________________________
Date: ___________________________