Gasboy PLUS FMS - Manual (Page 20)

Installing FedEx Islander PLUS FMS
Page 3-10 MDE-5067 FedEx Islander PLUS FMS Installation Manual · March 2013
4 Mechanical dispenser: Note that instead of the solenoid lead tying to the Reset Complete wire;
it now connects directly to Terminal Block for the Gasboy PLUS. Also, note that the Reset
Motor and Submersible Feeds tie together in the junction box of the dispenser (see
Figure 3-8 ).
Figure 3-8: Wiring Diagram - Mechanical Dispenser
Note: Reset Complete is the in-use line, this jumpers to line and the load line, which comes
back and run the solenoid valves. Pulse wires are polarized.