Gasboy PLUS FMS - Manual (Page 41)

MDE-5067 FedEx Islander PLUS FMS Installation Manual · March 2013 Page 4-15
Setting SiteOmat SiteOmat Software Set Up
16 Set the following in the Translate Product Codes screen based on the table:
• Product name - code: Select local product loaded in the Islander PLUS system from the
Product name - code drop-down list.
• External code: Enter the corresponding network code for the local product set in the
Product name - code box.
External code Product name - code
62 DEF - 2000
63 Oil - 1
99 Diesel - 1200
Note: Repeat step 16 to add product codes.
17 After completing the entries, click OK to save (see Figure 4-23 on page 4-14 ); click Cancel to
exit the screen without saving.
18 Verify that the Daily run enabled check box is not selected (see Figure 4-22 on page 4-13 ).
19 Click the Save button (see Figure 4-21 on page 4-13 ) to save your changes and return to the
Station Parameters screen with the advanced options.
Figure 4-24: Setting Station Parameter
20 Click the Modify button to save the changes and return to the Global tab (see Figure 4-24 ).
21 From the Global tab (step 12 on page 4-13 ), click the Save button.