Gasboy PLUS FMS - Manual (Page 44)

SiteOmat Software Set Up Pump Configuration
Page 4-18 MDE-5067 FedEx Islander PLUS FMS Installation Manual · March 2013
Following table shows the Cluster information for Mechanical Pumps.
• Orpak Payment Terminal (OrPT) - Select ORPT from the drop-down list.
Note: This setting causes beeps at the island when a ring or tag is read and authorized.
Figure 4-30: Verifying Pump Server - Message Factors
4 In the Message Factors section, verify that the details are set as shown in Figure 4-30 .
• If transaction amount and volume are not being recorded properly this setting may need to
be changed.
• Do not change until the Pulse Factor and DIP switches have been verified and corrected.
Figure 4-31: Verifying Mechanical Pump - Card
Pump # Head Cluster
1 1 1
2 2 1
3 1 2
4 2 2
5 1 3
6 2 3