Process check, Process check -29 – Gasboy PLUS FMS User Manual
Page 55
Advertising
MDE-5067 FedEx Islander PLUS FMS Installation Manual · March 2013
Page 4-29
Weights & Measures (W&M) Dongle Activation Procedure
SiteOmat Software Set Up
8
Verify that the W&M Dongle is activated. The pulse factor drop-down list will no longer be
present on the Setup screen.
Figure 4-51: Setting Pulse Factor
Process Check
After the wiring connections have been made, test the dispensers using the bypass switches on
the Terminal Block.
Advertising