Ivoclar Vivadent IPS Empress CAD Chairside - de-en-es-it-ru - Manual (Page 50)

Pr
oduct Information
2
Table of Contents
General
Information
Overview of the
Tr
eatment Pr
ocedur
e
Fabrication of the IPS Empr
ess CAD Restorations
IPS Empress CAD – Product Information 4
Material
Uses
Composition
Block concept
Product overview for CEREC
Preparation guidelines and minimum thicknesses
IPS Empress CAD – Overview of the Treatment Procedure 13
Overview of the treatment procedure
Shade determination
Intra-oral imaging
Milling
Staining and veneering
Ceramic firing
Etching and silanating
Cementation
Polishing
IPS Empress CAD – Inlays / Onlays – polished 20
Preparation
Finishing
Polishing
IPS Empress CAD – Inlays / Onlays – stained / glazed 24
Finishing and preparing for the stain and glaze firing
2-in-1 technique and staining and glaze firing in one step
Corrective firing
IPS Empress CAD – Veneers / Crowns – stained / glazed 27
Finishing
Preparing for staining
Stain and characterization firing
Glaze firing
Corrective firing
IPS Empress CAD – Veneers / Anterior Crowns – Cut-back and layered 32
Application of the IPS Empress Esthetic Veneer materials
Cut-back technique
Preparing for veneering
Wash firing
Incisal / Transparent firing
Finishing and preparing for stain and glaze firing
Stain and glaze firing
Corrective firing
IPS Empress CAD – General Information 41
Preparing for cementation
Firing parameters
Combination table