Introduction, Guide conventions – Dish Network 942 User Manual
Page 10
Introduction
3
How to Use this Guide
Guide Conventions
•
The names of remote control buttons are all uppercase.
Example: Press SAT.
•
Select means to move the highlight to an on-screen option or choice in a list and press
SELECT on the remote control.
Example: Select the Locks option.
•
Where this guide mentions nearby HDTV, it refers to the HDTV near the receiver. The
nearby HDTV receives TV1 menus and programming from the receiver’s TV1 outputs
and is connected using short audio/video cables.
•
Where this guide mentions remote TV, it refers to the cable-ready TV(s) located in
rooms away from the receiver. The remote TV receives TV2 menus and programming
from the receiver’s TV2 outputs through your in-home cable system.
•
Where this guide mentions remote control, it refers to either Remote Control 1 when
viewing a nearby HDTV or Remote Control 2 when viewing the remote TV(s). If a spe-
cific remote control must be used, this guide will refer directly to Remote Control 1 or
Remote Control 2.
•
The instructions in this guide are shown in two ways:
–
Instructions in the form of pictures are handy if you’d like to learn something
quickly. These instructions are numbered left to right as shown in the sample
below.
–
Instructions that are written out are helpful if you’d like to learn more details.
Chapter 1 Two Color.fm Page 3 Tuesday, June 7, 2005 12:41 PM