Dish Network 942 - Manual (Page 43)

Chapter 3
36
Tips
T
IPS
• Press INFO to get more information about the program you highlighted.
• Press VIEW TV to cancel almost any screen and return to live TV.
• Press SWAP, without pressing PIP first, to switch between the two tuners in Single
Mode.
Q
UESTIONS
• How can I customize the Program Guide? You can set up a Favorites List as
described on page 43. You can change how the Program Guide is displayed (size of
text, number of programming hours displayed, etc.) as described on page 102.
• Why does my Program Guide show only two days of programming? Your
receiver might not be connected to a signal from the 110°W satellite. Refer to Point
Dish and Check Switch on page 122 to see if you’re receiving the 110°W signal.
• Why are some of my channels missing?
– You may have locked or hidden the channels. See Chapter 6 - Locks on page 47
for information on locking and unlocking the receiver.
– You may have the wrong list showing in the Program Guide. Press GUIDE to open
the Program Guide. Press GUIDE again to select the next Favorites List. Press
GUIDE repeatedly to scan through all the available lists. See Favorites Lists on
page 41 for more information.
• Which remote do I use?
– Dual Mode: Use Remote Control 1 with TV1’s outputs (nearby HDTV) and
Remote Control 2 with TV2’s (remote TV) outputs.
– Single Mode: Both remotes control the entire receiver.
• Why isn’t PIP working? Your receiver is probably in Dual Mode. Press MODE on the
front panel to put the receiver in Single Mode if you’d like to use PIP.
Chapter 3 Two Color.fm Page 36 Tuesday, June 7, 2005 12:57 PM